Products & Prices

Product Packages

Portable ZoncoArm Support (PZAS) –
($1,446 part # 0027 A, for an adult / forearm trough size A, B, or C) ($1,410 part # 0027 B, for a child) / forearm trough size D, E, or F)  

Self-contained unit, no clamping required. Comes prefabricated.
Includes:
- Base (part # 0031)
- Two articulating arms (part # 0053)
- Two forearm support troughs (part # 0035 - # 0040)
Please indicate what size troughs you desire.

ZoncoArm Support (ZAS) –
($575 part # 0028 A, for an adult / forearm trough size A, B, or C)
($539 part # 0028 B, for a child / forearm trough size D, E, or F)

Clamps to a table, or a stable auxiliary stand. It can also be attached to wheelchair by using: a Wheelchair Clamp Adapter (part # 0068-69), or an Adjustable Multi-link Power-chair Mounting system (part # 0082 A, B, or C). The wheelchair mounts are sold separately. Comes prefabricated.
Includes:

- Base (part# 0033)
- One 2-link articulating arm (part # 0054)
- One forearm support trough (part # 0035 - # 0040)

Zonco Mobile Arm Valet (ZMAV) –
($1,208 part # 0029 A / forearm trough size A,B, or C)
($1,172 part # 0029 B / forearm trough size D, E, or F)

Clamps to a table, or a stable auxiliary stand. It can also be attached to wheelchair by using: a Wheelchair Clamp Adapter (part # 0068-69), or an Adjustable Multi-link Power-chair Mounting system (part # 0082 A, B, or C). The wheelchair mounts are sold separately. Comes prefabricated.

Includes:
- ZMAV base (part # 0034)
- One (ZMAV) shaft (part # 0058)
- 2-link articulating arm (part # 0055)
- One forearm support trough (part # 0047 - # 0052)
- One elbow-stop (part # 0080 A, B or C)
- One adjustable trough balance & pivot joint assembly (part # 0084)

Does not include, and is ordered separately:
- Handgrip (part # 0064 or # 0065)
- Handgrip stem (part # 0066 or #0067)

Low Speed Electric Mobile Arm Valet (EMAV) – (part # 0030)
- 2 articulated arm links ($3,107 part # 0030 A / forearm trough size A,B, or C)
- 2 articulated arm links ($2,974 part # 0030 C / forearm trough size D, E, or F)

A motorized elevator raises and lowers the arm trough 6"in approximately 12 seconds. Clamps to a table, Portable Adjustable Mounting System (part # 0084). It can also be attached to wheelchair by using: a Wheelchair Clamp Adapter (part # 0068-69), or an Adjustable Multi-link Power-chair Mounting system (part # 0082 A, B, or C). The wheelchair mounts are sold separately. Comes prefabricated.

Includes:
- ZMAV base (part # 0034)  
- One (ZMAV) shaft (part # 0059)  
- 2-link articulated arm (part # 0055)  
- One forearm support trough (part # 0047 – 0049) or (part # 0050 - 0052)
- One adjustable trough balance & pivot joint assembly (part # 0085)
- One elbow-stop (part # 0080 A, B, or C)
- One Linear Actuator – stroke size 6” (part # 0057)

Does not include , and is ordered separately:
- Handgrip (part # 0064 or # 0065)
- Handgrip stem (part # 0066 or #0067)
- Medical grade power supply 120 AC to 12VDC, medical grade power cord, wiring harness, and Control Boxwith 3” long bat / DPDT momentary toggle switch, $192 (part # 0086)

Fast Electric Mobile Arm Valet (FMAV) – (part # 0056)
- 2 articulated arm links ($4,019 part # 0056 A /  forearm trough adult sizes A,B, or C)

A quiet motorized elevator raises and lowers the arm trough 8" in approximately 5 seconds.

- 2 articulated arm links ($3,935 part # 0056 C / forearm trough child sizes D, E, or F)

A quiet motorized elevator raises and lowers the arm trough 6" in approximately 4 seconds. Clamps to a table, or a Portable Adjustable Mounting System (part # 0084). It can also be attached to wheelchair by using: a Wheelchair Clamp Adapter (part # 0068-69), or an Adjustable Multi-link Power-chair Mounting system (part # 0082 A, B, or C). The wheelchair mounts are sold separately. Comes prefabricated.


Includes:
- ZMAV base (part # 0031) - One (ZMAV) shaft (part # 0059)
- One forearm support trough (part # 0047 – 0049) or (part # 0050 - 0052)
- One adjustable trough balance & pivot joint assembly (part # 0085)
- One elbow-stop (part # 0080 A, B, or C)
- One Linear Actuator – stroke size 8" (part # 0061)

Does not include , and is ordered separately:
- Handgrip (part # 0064 or # 0065)
- Handgrip stem (part # 0066 or #0067)
- Medical grade Control Box 120 AC to 12VDC Medical grade power supply and medical grade power cord, wiring harness with hand-held wired remote switch for a 12VDC power supply. $192 (part # 0072
- Medical grade Control Box 120 AC to 12VDC Medical grade power supply and medical grade power cord, wiring harness with DPDT Rocker Foot Switch for a 12VDC power supply. $192 (part # 0060)

top

Components & Attachments

ZoncoArm Support (ZAS) Base $205

Table mount to support either a ZAS or a ZMAV with no elbow assist (part # 0033).

Zonco Mobile Arm Valet (ZMAV) Base $280

Table mount to support a ZMAV with 2 linier bearings for elbow assist (part # 0034).

Forearm Support Trough (size A,B, or C - $178) (size D, E, or F - $142)

ABS plastic with no elbow stop. Includes one shoulder bolt, and mounting hardware. Designed to swivel and slide on the ZoncoArm Support or the Portable ZoncoArm Support.

Size Length Inside wall radius
(A) adult 11" 2" R (part # 0035)
(B) small adult 7 1/2" 2" R (part # 0036)
(C) juvenile 9 1/2" 1 1/2 " R (part # 0037)
(D ) child 7 1/2 " 1 1/2 " R (part # 0038)
(E) small child 5 1/2 " 1 1/2 " R (part # 0039)
(F) toddler 5 1/2 " 1" R (part # 0040)

Forearm Support Trough –
(size A, B, or C - $252)
(size D, E, or F - $216)

ABS plastic. Includes an adjustable elbow stop , one shoulder bolt , and mounting hardware. Designed to swivel and slide on the ZoncoArm Support and The Portable ZoncoArm Support.

Size Length Inside wall radius
(A) adult 11" 2" R (part # 0041)
(B) small adult 7 1/2 " 1 1/2 " R (part # 0042)
(C) juvenile 9.5" 1 1/2 " R (part # 0043)
(D ) child 7 1/2 " 1 1/2 " R (part # 0044)
(E) small child 5 1/2 " 1 1/2 " R (part # 0045)
(F) toddler 5 1/2 " 1" R (part # 0046)

top

Forearm Support Trough –
($356 part # 0029 A / size A,B, or C)
($320 part # 0027 B / size D, E, or F)

ABS plastic with elbow stop, adjustable trough balance setting, adjustable pivot tension setting, and hardware to accept an adjustable handgrip stem shaft. Designed to slide, swivel, and pivot on the Zonco Mobile Arm Valet.

Size Length Inside wall radius
(A) adult 11" 2" R (part # 0047)
(B) small adult 7 1/2" 2" R (part # 0048)
(C) juvenile 9 1/2" 1 ½" R (part # 0049)
(D ) child 7 ½" 1 ½" R (part # 0050)
(E) small child 5 ½" 1 ½" R (part # 0051)
(F) toddler 5 ½" 1" R (part # 0052)

Multi-link articulating arms

Each arm includes two sealed bearing, one shoulder bolt, and one set-screw (for setting the desired amount of friction / resistance on each joint).

(A)2-links – 5.5” and 8” - $193 for ZAS or the ZMAV - small sizes (part #0054)
(B) 2-links –8.75” and 12.5” - $293 for ZMAV or ZAS (part # 0055)

Slow Speed Linear Actuator - motorized elevator for a the EZMAV

Stroke size 8" - $1,108 12VDC (part # 0056) or $1,108 24VDC – to be wired directly to the batteries of a power wheelchair (part # 0057)

Includes: pinch guard assembly, top and bottom mounting brackets

Does not include , and is ordered separately:
- Medical grade Control Box with wired remote switch. $160 (part # 0059 for a 12VDC power supply

ZMAV Shaft

- 14" long, stainless steel $97 (part # 0058)
- 18” long, stainless steel $112 (part # 0059)
- 24” long, stainless steel with longitudinal stabilizing groove $140 (part # 0060)

Handgrip $44 (plug into the handgrip stem)
(A) adult size, 1 ½" D (part # 0064)
(B) child size, 7/8" D (part # 0065)

Adjustable Handgrip Stems $127

Holds the Handgrip or other attachments
- Rigid stem with scoop (part # 0067)

top

Wheelchair Clamp Adapter $466

Can be clamped to vertical or horizontal tubes. The rectangular block, on which the ZAS or the ZMAV is clamped, can be adjusted and locked at any angle.
- Sized for a 7/8" D tube (part # 0068)
- Sized for a 1" D tube (part # 0069)

Universal Attachment Holder $112

This can hold an electric toothbrush, shaver, etc. (part # 0070)

Pizza/Berger Holder Attachment $142 (part # 0071)

Swivel Spoon $59

(Plug into the hand grip)
- Child size (part # 0073)
- Adult size (part # 0074)

Spoon $44

(Plug into the hand grip)
- Child size (part # 0075)
- Adult size (part # 0076)

Fork $44

(Plug into the hand grip)
- Child size (part # 0077)
- Adult size (part # 0078)

Pointer & Pencil Holder $24 (part # 0079)

Adjustable Elbow Stop $107 (part # 0080 A - adult size) (part # 0080 B - child size) (part # 0080 C - toddler size)
- Has a tension-adjustable ball-joint which allows the elbow stop to move smoothly and flex naturally with the elbow.

Cup Holder $71 (part # 0066) Connects to the handgrip like the fork and spoon, and holds a removable cup. Cup included.

Adjustable Pivot Stop $74 (part # 0081)

Universal Portable Mounting System $574 (part # 0087)
- Attaches to a portable and vertically adjustable tri-pod.
- Since it is standing on the floor instead of mounted to the wheelchair:
Includes: 62” Camera Tripod with carrying case and mounting bracket, ZoncoArm Mounting Block, 10 lbs counter-balance weigh with mounting bracket

  • The Mobile Arm Support can still be used even when the patient in a reclining position.
  • The Mobile Arm Support can be used even if the is no convenient place to mount it on the wheelchair.
  • The Mobile Arm Support can be used even when the patient is in a standing position.

Sold with a U-bolt Counter-balance Attachment Mounting bracket and a detachable 10 lb weight to give the tri-pod more stability.

Adjustable Multi-link Power-chair Mounting System $699 (part # 0082)
- Attaches to any power wheelchair (side or back).
- Can be easily removed by the turn of a knob; even with a Mobile Arm Support still clamped to it.
- Adjusts to desired angle by the turn of a knob; even with a Mobile Arm Support still attached to it.
- Sold with one of the following three mount base attachments:
1. U-bolt Attachment Mount - for bolting the attachment mount to either vertical or horizontal tubes. The tubes can be either 7/8" or 1" diameter. Please specify which tube diameter. (part # 0082 A - 7/8" D) or (part # 0082 A - 1" D)
2. Backing Plate Attachment Mount -- for bolting the attachment mount to a molded seat backrest, or a flat metal part of the frame. (part # 0082 B)
3. T-nut Attachment Mount -- for bolting the attachment mount using T- slot nuts in slotted channels, which are located on the back or side of a power-chair. (part # 0082 C)
4. Universal Super Clamp Attachment Mount w/Ratche5 $71 -- A convenient, powerful clamping device capable of being attached to vertical tubes and other supporting structures between 13mm and 55 mm. Ideal for fast and easy set ups (part #0083 - sold separately).

Adjustable trough balance & pivot joint assembly $215 (part # 0085)
Attaches under the forearm trough, and makes it easy to quickly adjust the balance of the forearm trough with just the turn of a knob. It also makes it possible to easily and quickly adjust the friction of the pivot joint, and the range which the forearm trough is allowed to pivot up and down.

top



zonco arm support
CONTACT US

ZoncoArm
PO Box 208
Cokato, MN 55321

info@zoncoarm.com
612-257-1993